Garage floors are having a hard life because you move heavy vehicles over the floor. The oil drips, extreme temperatures, and the substance that come with tires affect the life of the garage floor. As result, the garage floor might crack up, caving in, shifting, and crumbling. When the garage suffers from the factors mentioned, with time, it needs repairing or installing a new floor.
The garage floors are supposed to provide a durable and level surface that can bear the frequent load and use. The leveled garage floor means that your garage would be sealed all the way when the garage door is closed. If the garage floor is not leveled, the air, rain, or snow would easily come inside making more damages.
How To Install New Flooring in Your Garage?
Why Garage Floors Crack?
The cracking of the garage floor is inevitable. The material used in the garage floors such as concrete is not able to bend or stretch without cracking or breaking. Depending on the temperature and weather, the concrete expands and contracts. As a result, the garage floor gets cracks. Most garage floors are built with contraction joins that permit cracking.
The contraction joints are cut joints from the saw or deep grooves. In a two-door garage, you will see four separate slabs. These are contraction joints. The grooves create a line of weakness in the concrete. Hence, the cracks follow the groove rather than through the surface. Even though with contraction joints, you still will be having cracks in other parts of the garage. It happens when the soil settles under the slab or due to uncontrollable variables.
The cracks in the concrete floor can be repaired because they are caused to environmental changes rather than structural.
When to Replace or Install New Garage Floor?
To repair the concrete of your garage floor, you can DIY fix it by using epoxy, concrete sealer, etc. If the damage is severe than expected, you will have to install new flooring in your garage. Before we move to the DIY repair and installation, we must know the reasons behind the garage floor damage. It will help you to avoid them in the future and save the garage floor for a longer time.
- Incomplete preparation work required before the original installation of the floor such as insufficient reinforcement and inadequate soil can cause cracks and damages in the concrete floor.
- The poor-quality aggregate used for concrete mixes such as iron pyrite can corrode over time.
- Due to poor soil drainage, the water that floats on the floor forms moisture. As a result, the foundation of the floor gets cracked.
- The freeze-thaw cycle. It is because the garages are poorly heated or sometimes not at all.
- As the soil shifts, the concrete gradually settles in the place.
- Salt-based deicer brought with the car tires in the winter erodes the concrete floor.
To avoid serious problems in the future, you should be replacing the previous flooring with a new one.
DIY Garage Floor Replacement Process
Once you have decided to replace the garage floor with new options, you must follow the replacement process:
- Find an alternative parking lot for your vehicles. Move the appliances and other belongings of the garage to the storeroom.
- Now remove and demolish the current flooring.
- To reach the soil ground for leveling, you will have to dig deeper.
- Reinforce and repair the foundation of the floor, if necessary.
- For separation, protection, and reinforcement, install a geotextile membrane.
- For moisture and water draining in the garage, set up the drain.
- Now fill in the gravel (3/4”) and compact it.
- Put a vapor barrier in the place.
- For reinforcement, you can install fiber mesh or wire mesh.
- For the new floor, pour the concrete.
- Before you move your cars, bicycles, and garage belongings back to the garage, make sure that the concrete floor is cured properly.
DIY Garage Floor Installation Tools
You can DIY repair your concrete garage. If you are having a concrete garage, you can do the floor paint to make it look good or you can epoxy or concrete sealer to repair the garage flooring. The tools you will be needing to repair or install a new garage floor will be:
- Workshop Vacuum
- Knee Pads
- Safety Goggles
- Ball-Peen Hammer
- Soft-Bristled Brush
To cover the damage and stains
Protects the floor from tear and wear
Decorative coloring with a marbled finish
Gives a chemical, hard, and solvent resistant finish to the floor
Hassle-free option to protect the garage floor
Rigid Snap-Together Tiles
Easy to install for heavy loads with perforates tiles for water draining
Must-Have Tools for Installing New Flooring in Your Garage
The durable and topline workshop vacuum comes with accessories and hose storage that keeps the vacuum attachments within your reach. It comes with a wet cleanup feature. The large drain port and integrated blower clean up the water spill on any floor. The water goes to the drainage port where you can empty it easily. The organized storage solution gives you an easy-to-reach for cord, hose, and other included accessories.
The Dual-Flex locking hose is attached to the slot at the rear wheel. If you are using a vacuum cleaner, you would be facing an issue of constant loose pulls during the use. This workshop vacuum comes with a locking adapter feature. During the use, the hose will not detach from the vacuum. You don’t have to twist or screw the hose to attach or detach it with the vacuum, instead only a click and the work is done.
It comes with better mobility because of the large rear wheels. They make it easier for you to drag it anywhere you want to. Also, you will not have to put more effort into dragging the vacuum. Talking about the power and suction of the vacuum, 1 gallon of water per second is sucked by this vacuum.
- Wet Cleanup
- Ergonomic Handle
- Large Rear Wheel (Better Mobility)
- Maximum Suction and Power
- Fine Dust Qwik Lock
It is a perfect toolset for light and heavy-duty automotive and household scraping jobs. The set is having a multi-purpose scraper, protective safety cap, mini scraper, and heavy-duty replacement razor blades. The design of the mini scraper is made for everyday use. Also, they are made for hard-to-reach areas. The multi-purpose scraper is suitable for more heavy-duty automotive and household scraping jobs.
You can use them to remove the window film, stickers, labels, etc. Also, you can remove the sealant, caulk, borders, etc. from the garage floor or any other floor. To remove the hand fatigue, control, and better grip, it comes with ergonomic handles.
- Heavy-Duty Replacement Razor Blades
- Tough Polypropylene Handle
- TRP Comfort Sleeve
- Ergonomic handles
The durable dustpan and brush are made of PP Plastic for easy cleanups such as dirt, dust, crumbs, etc. the soft molded pan lip makes it easier and efficient for you to pick up the mess. The ergonomic brush handle gives you a comfortable and firm grip for picking up the mess in the dustpan.
The brush is having soft 2-inch bristles that drag the dust or any mess from the floor to the dustpan. You will be having better storage because the brush handle can be fixed into the dustpan handle.
When you are removing the concrete floor of your garage, you might need to get on your knees for more power to remove the concrete floor. Sometimes you get on your knees to clean the hard-to-reach areas in the garage. If you are not wearing knee pads or any protective gear, you will be getting cuts or scrapes on your knees with stones or broken pieces of the concrete floor. To avoid any injury, you should be wearing a knee pad.
The premium protection provided by these knee pads gives you cushion padding from the durable EVA foam. The thick poly shield will protect your knees from scrapes or cuts. The adjustable straps make a firm grip on your knees. It does not move from the adjusted place while movements.
Even though these knee pads are made for heavy-duty works, you will not be tired of wearing them. They are comfortable and soft.
- Soft Gel Core
- EVA Foam Padding
- Adjustable Straps
- Tri-Buckle System
To handle all day-to-day utility tasks, this utility glove is designed for form-fitting and comfort. For your hand safety, it comes with a thermoplastic rubber knuckle. It protects your hand from an impact. Also, it provides abrasion protection across your knuckles. The loop closure and adjustable hook give you better performance with a perfect fit. The sweat management feature keeps you focused on your work. Wiping off the sweat is just a thumb away.
You will be needing this glove while installing the new flooring in your garage. When you go for DIY installation of the garage floor, you need high-quality gloves to protect your hands from cuts and scrape. Apart from the cuts and scrapes, you need to protect your hands from the glue you will be used for different floor options. While painting the garage floor, you can wear them to avoid any paint spill on your hand.
- Hand Safety
- Sweat Management
- Secure Fit
- Synthetic Leather Reinforcements
- Thermoplastic Cuff Puller
The ball-peen hammer comes with great toughness and strength. For powerful strike, the hammer comes with a heat-treated, drop forged, and profiled head. The polished head and the ball peen will eliminate the hand fatigue while hammering the nails. Instead of a fiberglass handle, there is a graphite core that gives more strength to the hammer. Also, it makes it durable. The non-slip cushion grip makes it soft and comfortable for you to handle or hold.
When you are installing new flooring in your garage, you will be dealing with nails, shaping the metal sheet, or striking peening rivets, chisels, or punches. This ball-peen hammer makes it perfect for your task. You will be getting a powerful strike without tiring your hands.
- Polished Head
- Graphite Core
- No-Slip Grip
- Perfect For Contouring and Shaping the Metal
The lasting durability and easy use make it the best hand trowel for different tasks. The handle of the trowel is designed to remove wrist or hand fatigue. The aluminum covering helps the trowel to last for a longer time. Hence, it is rust-free. The aluminum covering will not cast off the trowel, no matter how tough or heavy-duty task you are performing. For convenient storage, the handle is having a hole for hanging.
You would be needing a trowel to level or smooth the texture of the top layer of concrete. The design and shape of the trowel are made for hard-to-reach areas. Also, you will be needing it to apply the grout into gaps of the floor. If you are using vinyl tiles for your garage floor, you will be needing them for the concrete or glue for installing the vinyl tiles.
- Aluminum Head
- Cuts Tough Turf
A safety goggle that protects from debris and dust is necessary for utility work. The anti-fog lens coating gives tough protection against fogging. The soft and dual-injected rubber fits your face and protects the eyes from dust and debris. The adjustable head strap provides a comfortable fit. The ventilation channel in the safety goggle ensures breathability. Also, it makes it anti-fog. The tough coated lens is scratch-proof and gives you a clear vision.
While installing new flooring in your garage, you will be needing safety goggles to protect your eyes from hazards. It protects your eyes from flying objects while you are hitting the floor with a hammer or hammering a nail. Also, it protects your eyes from fragments, sand, particles, dirt, etc. that can cause itching or an injury to your eyes.
- Elastic Headband
- Tough Coat Lens
- Soft Dual Injected Rubber
- Ventilation Channel
|WORKSHOP WS1600SS||Titan 17002 2- er Set||Amazon Basics Dustpan and Brush Set||McGuire-Nicholas - 1MN-350||Ironclad General Utility Work Gloves||Real Steel 0506||Fiskars, 384220-1001||DEWALT DPG82-11C|
|Unique Feature||Wet Cleanup,||Multi-Purpose and Mini Razor Scraper||Polypropylene Plastic||EVA Foam||Faux Leather, Nylon, Knuckle Protection||Polished Head, Graphite Forged||Aluminum Coating||Polycarbonate|
|Ideal For||Heavy-duty wet or dry mess||Scraping||All Surface||All Surface||All Surface||All Surface||For Concrete and Gardening||For Eyes|
|Usage||Hard Floor||Underlay or removal||For picking up dust and particles||For painting, plumbing, flooring, welding||Flooring, Woodwork, Roofing||For nailing and shaping metal||Surface Leveling, Planting, Digging||Protection from Dust and Debris|
Installing New Flooring in Garage – Safety Measures
There are certain indications through which you can get to know that your garage floor needs repairing or replacing. If you plan to install new flooring in your garage such as interlocking tiles, epoxy floor coating, rolling mats, etc. you will be needing tools to complete the task. Each flooring style requires different steps and techniques for installation.
Some are easy to install, like interlocking tiles, you will have to set the tiles like puzzle pieces. Make sure that you opt for the best and easy option according to your garage needs.